"Entwickelt um zu begeistern."
Thermaltake T1000 Transparent Coolant Series wurde mit der neuesten TT-Formel entwickelt, um als Korrosionsschutzflüssigkeit und Wärmeübertragungsmedium für PC-Wasserkühlungen verwendet zu werden. Mit transparenten Farben, T1000 ermöglicht Nutzern, einzigartige Farben durch Zugabe von TT Premium-Konzentrat zu schaffen. Die neue Formel verleiht der T1000 Coolant Series Farbstabilität und eine niedrige Viskosität, die ein effektives Fließen ermöglicht. Thermaltake T1000 Coolant Series ermutigt Nutzer, ihre eigenen Farben für ihr System zu kreieren!
Tt LCS Certified ist eine exklusive Zertifizierung von Thermaltake, die nur für Produkte gilt, die Design- und Hardcore-Enthusiasten-Standards erfüllen, die ein echtes LCS-Gehäuse erfüllen sollte. Die Tt LCS-Zertifizierung wurde geschaffen so dass wir bei Thermaltake allen Power-Usern mitteilen können, welche Gehäuse getestet wurden, um am besten kompatibel zu sein mit extremen Flüssigkühlungskonfigurationen getestet wurden, um sicherzustellen, dass Sie die beste Leistung mit den besten Eigenschaften und der besten Ausstattung erhalten.
Die T1000-Coolant-Serie ist mit der neuesten Formel von Thermaltake konzipiert, um ultimative Leistung zu erzielen. Die neue Formel minimiert die Möglichkeit von Ausfällungen, um einen klaren Kühlmittelfluss für Ihr System zu gewährleisten. Weitere Eigenschaften wie Frostschutzmittel und Korrosionsschutz für Kupfer, Messing, Nickel und Aluminium sorgen für eine hervorragende Leistung des T1000-Kühlmittels.
Fließt wie pures Wasser
Durch das spezielle Verfahren der T1000-Coolant-Serie werden viele Eigenschaften von reinem Wasser vereint. Die Qualität
wie z. B. eine niedrige Viskosität ermöglicht einen effektiven Fluss vom T1000 Coolant. Die Viskosität beeinflusst die Fließfähigkeit der Kühlflüssigkeit, eine niedrigere
Viskosität bedeutet weniger Widerstand und damit einen besseren Fluss der Kühlflüssigkeit. Bei 20°C hat T1000 Coolant eine um 26,4% niedrigere Viskosität
als andere Kühlmittel und 25,8 % niedriger bei 40°C.
Sei kreativ!
Das nicht entzündbare T1000 Coolant ist eine gebrauchsfertige Kühllösung mit einer Haltbarkeit von mindestens 3 Jahren in luftdichten Behältern. Es bietet eine hervorragende Leistung und schützt das gesamte Kühlsystem vor Korrosion.
*MSDS: Material Safety Data Sheet
Die T1000 Coolant-Serie ist in sieben transparenten Farben erhältlich: rot, blau, violett, orange, säuregrün, grün und gelb. Unsere Formel gewährleistet Farbsättigung, Stabilität und Dauer.
Die T1000-Coolant-Serie ist GRÜN! Hergestellt aus biologisch abbaubaren Materialien, verschmutzt T1000 die Umwelt nicht und sammelt sich nicht an. Thermaltake hat die T1000 Coolant Series mit Blick auf die Umwelt entwickelt.
Cautions
Thermaltake recommends the following steps to be taken
before using
the
Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop
setup
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
P/N | CL-W245-OS00PL-A |
---|---|
Capacity | 1000 ml |
FARBE | Purple |
Hazardous component | 1,2-Propanediol< 6% CAS 57-55-6 EC 200-338-0 |