Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo
Pacific DP100-D5 Plus Distro-Plate with Pump Combo

Pacific DP100-D5 Plus Distro-Plate with Pump Combo

Auf Lager
P/N
CL-W263-PL00SW-A
339,90 € (included VAT)
Die Pacific DP100-D5 Plus RGB Distro-Plate mit D5 Pumpenkombination vereinfacht die Struktur des Tubings Ihrer Hard-Tube-Wasserkühlung und bieten Anfängern sowie erfahrenen Wasserkühlungsenthusiasten einen intelligenteren Weg.

Pacific DP100-D5 Plus

Die Thermaltake Pacific DP100-D5 Plus ist eine universale Distro-Plate mit einer vorinstallierten D5 Pumpe und kann an den meisten 360mm Radiatorplätzen angebracht werden. Zudem ist die DP100-D5 mit dem TT RGB Plus Ecosystem synchronisierbar.

 
Einfache Installation
Kompatibel mit mehreren Gehäusen, was eine universelle Anpassung ermöglicht.
Unterstützt 360mm Radiatorbefestigungspunkte
Erfordert ein Gehäuse, das 2 oder mehr 360mm Radiatorenplätze für die Installation unterstützt.
 
 
 
 

TT RGB PLUS Software

2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.

2.0 DOWNLOAD NOW 2.0 USER MANUAL
1.0 DOWNLOAD NOW   1.0 LEARN MORE  

Sync with Razer Chroma Lighting

All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!

LEARN MORE

Works with Amazon Alexa

All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.

LEARN MORE

TT AI Voice Control

Give you full control over the TT RGB PLUS products with your voice. “SyncALL, Say”Hello TT”.

Note: TT AI Voice control, Razer Chroma and Amazon Alexa requires the use of at least one TT RGB PLUS software-enabled product to function.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Category Caution
Chassis, ARGB Fan, ARGB AIO
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.
RGB Memory, VGA Waterblock, Distro Plate
  • This product can only be used with either the TT RGB PLUS software or the dedicated Motherboard software. By having more than two applications open may cause conflicts
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
Mehr Informationen
P/N CL-W263-PL00SW-A
Dimensions 360 (L) x 120 (W) x 84.8 (H)
Interface USB 2.0 connectors (9 Pin)
System compatibility Windows 7 / 8 / 8.1 / 10
Power Input 37 W / 3.5 W
Pump P1: 1,800 RPM
P2: 2,550 RPM
P3: 3,300 RPM
P4: 4,050 RPM
P5: 4,800 RPM
Connector 4 Pin
Material PMMA
Max Air Flow 1135 L/h
Max. Air Pressure 50 PSI
Rated Voltage 12 V / 5 V
Capacity 200 ml
Parts Stopper *4 (G 1/4 )
Screw Thread G 1/4

User Manual

  • Dateiname
  • Beschreibung
  • Größe
  • Version
  • Release Date