Pacific M240 D5 Hard Tube Water Cooling Kit
Pacific M240 D5 Hard Tube Water Cooling Kit

Pacific M240 D5 Hard Tube Water Cooling Kit

Nicht auf Lager
P/N
CL-W216-CU00SW-A
511,90 € (included VAT)
Water Cooling Kit mit Wasserblock, D5-Pumpe, 120mm Lüfter, 240mm Slim-Radiator, Kühlmittel und anderem Zubehör.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
Mehr Informationen
P/N CL-W216-CU00SW-A
Dimensions 518(L) x 198 (W) x 223 (H)
Compatibility Intel LGA 2066/2011/1700/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
(CPU Socket)
Components Dimensions Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimensions OD : 16mm , ID : 12mm , L : 500mm
Fan Specs 1500 RPM (1000RPM with LNC)
Coolant Pure Clear Coolant
Kit Contents CPU Water Block
- Pacific W3 CPU Water Block x1

Pump/Reservoir
- Pacific PR15-D5 Pump/Reservoir Combo x1

Radiator
- Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1

Fittings
- Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
- Pacific G1/4 90 Degree Adapter - Chrome x2

Fan
- Riing 12 LED RGB 3 Pack x1

Coolant
- Thermaltake C1000 Pure Clear Coolant x1

Tube
- V-Tubler PETG Tube 16mm OD 500mm 4Pack x1

Accessory
- Silicone Insert 900mm Tt Premium Edition
- Intel and AMD Universal Backplated & Mounting Kit
- 24pin ATX Bridge Tool x1
- Thermaltake Thermal Grease x1

User Manual

  • Dateiname
  • Beschreibung
  • Größe
  • Version
  • Release Date
  • Manual
  • Multi-language
  • 9.9 MB
  • 2018-01-08